Camera Zoom - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

camera zoom

Zooms the camera in toward the subject or out away from the subject.
Synopsis camera zoom { in [<speed>] | out [<speed>] | stop | get | set}
Options in
out
speed [1 – 7]
stop
get
set <1 – n>
Examples >camera zoom in
OK
>
Zooms the camera in at the default speed.
>camera zoom stop
OK
>
Stops the camera's zoom motion.
>camera zoom set 14 3
OK
>
Sets the camera's zoom level to 14x at a speed of 3.
>camera zoom get
14
OK
>
Returns the camera's current zoom level.
Moves the camera in.
Moves the camera out.
Optional: Specifies the zoom speed as an
integer (1 to 7). Default speed is 3.
Stops the camera's zoom movement.
Returns the camera's current zoom level as a
floating point value.
Sets the zoom level as a floating point value.
The value of n (maximum zoom) depends on
the camera's capabilities. For example, the
range is 1.00 to 12.00 for a 12x camera. If the
value is out of range, the camera returns an
error message and no zoom change occurs.
The speed parameter may be used with the
camera zoom set command.
The camera zoom set command blocks
execution of subsequent commands until the
camera reaches the specified position. Use the
no_wait parameter if this is not the desired
behavior.
52