Camera Zoom - LEGRAND vaddio RoboFLIP 30 HDBT Complete Manual

Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera

camera zoom

Zooms the camera in toward the subject or out away from the subject.
Synopsis camera zoom { in [<speed>] | out [<speed>] | stop | get | set}
Options in
out
speed [1 – 7]
stop
get
set <1 – n>
Examples >camera zoom in
OK
>
Zooms the camera in at the default speed.
>camera zoom stop
OK
>
Stops the camera's zoom motion.
>camera zoom set 8 3
OK
>
Sets the camera's zoom level to 8x at a speed of 3.
>camera zoom get
8
OK
>
Returns the camera's current zoom level.
Moves the camera in.
Moves the camera out.
Optional: Specifies the zoom speed as an
integer (1 to 7). Default speed is 3.
Stops the camera's zoom movement.
Returns the camera's current zoom level as a
floating point value.
Sets the zoom level as a floating point value
from 1.00 to 30.00.
If the value is out of range, the camera returns
an error message and no zoom change occurs.
The speed parameter may be used with the
camera zoom set command.
The camera zoom set command blocks
execution of subsequent commands until the
camera reaches the specified position. Use the
no_wait parameter if this is not the desired
behavior.
51