Renaming Presets And Custom Ccu Scenes - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras
To store a preset or custom home position:
1. Set up the shot. If necessary, adjust color and lighting (CCU settings) as well.
2. Select Store to open the Store Preset dialog.
3. Select the preset to define.
4. Select Store with Current Color Settings to save the current CCU settings along with the camera
position.
5. Select Save with Tri-Sync to allow the pan, tilt, and zoom motors to move simultaneously from other
presets to this position.
6. Store the preset.
Note
Tri-Synchronous Motion works best for on-air shots requiring significant movement. It is not useful when
moving the camera less than 10° or when the camera is not on the air.

Renaming Presets and Custom CCU Scenes

C
AMERA PAGE
You can rename presets and custom scenes. The process is the same for both. Right-click the button for
the custom scene or preset, and edit the label.
29