Adjusting The Focus; Speed Adjustments; About Tri-Synchronous Motion - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

Adjusting the Focus

C
AMERA PAGE
Open the Focus control to select Auto-focus, or set manual focus with the + (near) and – (far) buttons.
I know you already understand this, but I'm going to say it anyway: The + and – buttons don't work when
Auto Focus is selected.
For users who are not logged in as admin, focus control is available via the IR Remote Commander.

Speed Adjustments

C
AMERA PAGE
The following speed adjustments are available:
Manual pan, tilt, and zoom speeds – Used when you control camera movements with the IR Remote
n
Commander or the arrow buttons in the web interface
Global Preset Non-Tri-Sync Speeds – Separate pan, tilt, and zoom speeds used for movements
n
between presets that do not use Tri-Synchronous Motion.
Tri-Synchronous Motion speed – Only available when storing a preset with the Store with Tri-Sync
n
option selected.

About Tri-Synchronous Motion

The Tri-Synchronous Motion algorithm calculates the pan, tilt and zoom speeds needed for the camera to
move to a preset position, so that all three movements begin together and arrive at the same time. It
ensures smooth on-air movements when making large changes in position, particularly when the zoom also
changes. Tri-Synchronous Motion is only available as an option for moving to specific preset position.
Tri-Synchronous Motion is not helpful in movements of less than 10°, and is typically used only for on-air
operation.
34