Camera Led; Camera Standby - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

camera led

Set or change the behavior of the indicator light.
Synopsis camera led { get | off | on }
Options get
off
on
Examples >camera led off
OK
>
Disables the indicator light. You cannot tell by looking at the camera whether it is
sending video.
>camera led get
led:
OK
>
Returns the current state of the indicator light.

camera standby

Set or change camera standby status.
Synopsis camera standby { get | off | on | toggle}
Options get
off
on
toggle
Examples >camera standby off
OK
>
Brings the camera out of standby mode.
>camera standby get
standby:
OK
>
Returns the current standby state.
on
on
59
Returns the indicator light's current state (on or
off).
Disables the indicator light.
Enables the indicator light.
Returns the camera's current standby state.
Brings the camera out of standby (low power)
mode.
Stops video and puts the camera in standby
mode.
Changes the camera's standby state – if it was
not in standby mode, it enters standby; if it was
in standby mode, it "wakes up."