Connecting The Camera - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

Connecting the Camera

Note
Talk to the network administrator before you connect the equipment.
If you install this equipment on a non-DHCP network (one that uses only static IP addresses), you may
need to configure the camera with a static IP address before you connect it to the network. Work with the
network administrator to determine how to configure the equipment.
See Configuring the Camera with a Static IP Address for step-by-step instructions to configure a static IP
address.
This diagram shows a simple installation for a RoboSHOT NDI camera.
10