Camera Home; Camera Pan - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

camera home

Moves the camera to its home position.
Synopsis camera home
>camera home
Example
OK
>

camera pan

Moves the camera horizontally.
Synopsis camera pan { left [<speed>] | right [<speed>] | stop | get | set }
Options left
right
speed <1 – 24>
stop
get
set <position>
Examples >camera pan left
OK
>
Pans the camera left at the default speed.
>camera pan stop
OK
>
Stops the camera's horizontal motion.
>camera pan set -15 22
OK
>
Pans the camera to 15° left of its centerline using a speed of 22.
Moves the camera left.
Moves the camera right.
Optional: Specifies the pan speed as an integer
(1 to 24). Default speed is 12.
Stops the camera's horizontal movement.
Returns the camera's absolute pan position in
degrees, as a floating point value between
approximately -150.00 (left) and 150.00 (right).
Sets the camera's absolute pan position in
degrees, as a floating point value between
approximately -150.00 and 150.00. This is the
minimum range. Individual cameras may have
an additional degree or two of travel before they
reach their physical limits. If the value is out of
range, the camera returns an error message
and no motion occurs. The speed parameter
may be used with the camera pan set
command.
The camera pan set command blocks
execution of subsequent commands until the
camera reaches the specified position.
50