Lighting Adjustments; Fine-Tuning Image Quality And Color - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

Lighting Adjustments

C
AMERA PAGE
The camera provides settings to compensate for common lighting problems.
Auto Iris allows the camera to compensate automatically for the light level.
n
Backlight Compensation reduces contrast to adjust for bright light behind the main subject of the
n
shot. Use this if the subject is in front of a window, projector screen, or other bright area and appears as
a silhouette. This setting can't be used with Wide Dynamic Range.
Wide Dynamic Range automatically darkens bright areas and brightens dark areas to provide a more
n
properly exposed image in challenging lighting conditions. This setting can't be used with Backlight
Compensation.
S , G
YSTEM PAGE ENERAL TAB
Point Light Compensation reduces the intensity of small, extremely bright areas (point light sources) that
would otherwise swamp the camera with light and make it difficult to see details in areas with less intense
lighting. This setting is on the General tab of the System page.
The Lighting and Image Quality Cheat Sheet

Fine-Tuning Image Quality and Color

C
AMERA PAGE
Fine-tune the color and lighting as needed using the Color Settings controls.
Auto White Balance adjusts color automatically. Red gain and blue gain controls are not available
n
when Auto White Balance is selected.
Red Gain and Blue Gain provide manual color adjustment.
n
Detail adjusts the image sharpness. If the video looks grainy or "noisy," try a lower Detail setting. (As in
n
conversation, too much detail is bad.)
Chroma adjusts the color intensity.
n
Gamma adjusts the range (grey density) between bright areas and shadows.
n
If you change Red Gain or Blue Gain and you don't like the results, start over by selecting and then
deselecting Auto White Balance.
The Color Adjustment Cheat Sheet
may be helpful.
may be helpful.
31