Enabling Telnet Access; Enabling Http Access; Installing An Ssl Certificate - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

Enabling Telnet Access

S
ECURITY PAGE
If your installation requires camera access via Telnet, you may choose to enable the camera's internal
Telnet server.

Enabling HTTP Access

S
ECURITY PAGE
By default, the web interface uses the HTTPS protocol, and HTTP is disabled. You can configure the
camera's web interface to allow a less secure HTTP connection instead.
1. Select Show Advanced Settings. The advanced options open.
2. To allow HTTP connections, select HTTP Access enabled. The camera's web interface will be
available via HTTP or HTTPS connection.
3. To switch to an HTTP connection, select Switch to HTTP.

Installing an SSL Certificate

S
ECURITY PAGE
When the camera does not have an SSL certificate, your browser's address bar may display a security
indication.
Work with your network security professional to install the camera's SSL certificate.
Caution
Consult your network security professional to manage the camera's SSL certificate. Do not make any
changes in the Certificate or Private Key text boxes without guidance from your organization's network
security professional.
25