Camera Ptz-Position - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

camera ptz-position

Specifies multiple-axis movements to absolute positions.
Pan, tilt, and zoom may be specified in any order. All movements start simultaneously.
Synopsis camera ptz-position pan <position> tilt <position> zoom <position> [no_wait]
Options pan <position>
tilt <position>
zoom <position>
no_wait
Examples >camera ptz-position pan -15 tilt 5 zoom 1.5 no_wait
OK
>
Moves the camera 15° left from its centerline and 5° up from horizontal, and zooms
to 1.5. The command prompt appears while the camera is still in motion.
<position> is a floating-point value approximately -
160.00 to 160.00. Individual cameras may have
slightly more travel.
<position> is a floating-point value approximately -
30.0 to 90.0. Individual cameras may have slightly
more travel.
<position> is a floating-point value 1.0 to 12.0 for
12x cameras or 1.0 to 30.0 for 30x cameras.
Optional – allows the command to return the
command prompt immediately, while the requested
camera movement is still in progress.
53