Camera Ccu Set - LEGRAND vaddio RoboSHOT 12E NDI Complete Manual

Complete Manual for RoboSHOT 12E NDI and RoboSHOT 30E NDI High-Performance PTZ Cameras

camera ccu set

Sets the specified CCU (lighting and color) information.
Synopsis camera ccu set <param> <value>
Options auto_white_balance {on | off}
red_gain <0 – 255>
blue_gain <0 – 255>
backlight_compensation {on
| off}
iris <0 – 13>
auto_iris {on | off}
gain <1 – 11>
detail <0 – 15>
chroma <0 – 14>
gamma <-64 – 64>
wide_dynamic_range {on | off}
Examples >camera ccu set auto_iris off
OK
>
Turns off auto-iris mode, returning the camera to manual iris control.
>camera ccu set red_gain 10
OK
>
Sets the red gain value to 10.
Sets the current state of the auto white balance
setting (on or off). Overrides red gain and blue
gain manual settings.
Sets the red gain value as an integer (0 to 255).
Only valid when auto white balance is off.
Sets the blue gain value as an integer (0 to
255). Only valid when auto white balance is off.
Sets the current state of the backlight
compensation setting (on or off). Only valid
when wide dynamic range mode is off.
Sets the iris value as an integer (0 to 13). Only
valid when auto-iris is off.
Sets the auto-iris state (on or off). Disables
manual iris and gain when on.
Sets gain value as an integer (1 to 11). Only
valid when auto-iris is off.
Sets the detail value as an integer (0 to 15).
Sets the chroma value as an integer (0 to 14).
Sets the gamma value as an integer (-64 to 64).
Sets Wide Dynamic Range mode on or off.
Only valid when backlight compensation is off.
58