Camera Zoom - LEGRAND VADDIO RoboSHOT 30E-M Complete Manual

camera zoom

Moves the camera in toward the subject or out away from the subject.
Synopsis camera zoom { in [<speed>] | out [<speed>] | stop | get | set <position> [<speed>]
[no_wait] }
Options
in
out
stop
speed [1 - 7]
set <zoom>
no_wait
get <zoom>
>camera zoom in
Examples
OK
>
Zooms the camera in at the default speed.
>camera zoom out 7
OK
>
Zooms the camera out using a speed of 7.
>camera zoom stop
OK
>
Stops the camera's zoom motion.
Complete Manual for the RoboSHOT 30E-M PTZ Camera
38
Zooms the camera in.
Zooms the camera out.
Stops the camera's zoom movement.
Optional: Specifies the zoom speed as an
integer (1 to 7).
Default speed is 3.
Sets the camera's zoom level as a floating
point value between 1.00 and 30.00.
The camera zoom set command blocks
execution of subsequent commands until the
camera reaches the specified position.
Optional – allows the camera zoom
setcommand to return the command prompt
immediately, while the requested camera
movement is still in progress.
Returns the camera's zoom setting as a
floating point value.