Table of Contents
Advertisement
Quick Links
Installation Guide for the
ConferenceSHOT ePTZ Auto-Framing Camera
Overview
This guide covers:
®
ConferenceSHOT
ePTZ auto-framing camera:
North America – 999-21050-000
n
Europe and UK – 999-21050-001
n
n
Australia and New Zealand – 999-21050-009
What's in this Guide
This guide covers:
n
Physical features
Tips for a successful installation
n
Pre-installation functional check
n
Information on connecting and mounting the camera
n
n
Camera power-on
If you are responsible for configuring the equipment after installing it, please
use the Complete Manual for the ConferenceSHOT ePTZAuto-Framing
Camera. It includes all the information in this guide, plus information on configuring, operating, and
troubleshooting the camera.
Features
Integrated camera and audio system, ideal for small to medium conference rooms
n
TM
n
IntelliFrame
algorithm keeps participants in view reliably, without facial recognition
Simultaneous HDMI, uncompressed USB 3.0 and H.264 IP streaming (RTSP or RTMP)
n
Up to 1080p/30 video
n
Integrated phased microphone array
n
n
Audio line in and line out
Universal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows
n
®
macOS
, and Linux operating systems, compatible with most UC conferencing applications
n
Integration-ready Telnet control
Full administrative control via web interface; manage the camera remotely while monitoring the
n
stream separately
n
Presenter-friendly IR remote control
Document Number 411-0054-31 Rev A – November 2021
®
,
Advertisement
Table of Contents
Related Manuals for LEGRAND Vaddio ConferenceSHOT 999-21050-001
Summary of Contents for LEGRAND Vaddio ConferenceSHOT 999-21050-001
- Page 1 Installation Guide for the ConferenceSHOT ePTZ Auto-Framing Camera Overview This guide covers: ® ConferenceSHOT ePTZ auto-framing camera: North America – 999-21050-000 Europe and UK – 999-21050-001 Australia and New Zealand – 999-21050-009 What's in this Guide This guide covers: Physical features Tips for a successful installation Pre-installation functional check Information on connecting and mounting the camera...
-
Page 2: A Quick Look At The Camera
Installation Guide for the ConferenceSHOT ePTZ Auto-Framing Camera A Quick Look at the Camera This section covers the physical features of the camera. Front of the Camera Camera and zoom lens – Up to 5x zoom. Integrated microphone – No external microphone needed in typical installations. Echo-canceling microphone picks up the voices of participants up to 10 ft. -
Page 3: Connector Panel
Installation Guide for the ConferenceSHOT ePTZ Auto-Framing Camera Connector Panel The connectors are on the underside of the camera. PoE+ – RJ-45 connector. Connect to the network and to power via the Power and Data Out port of the mid-span PoE+ power injector. Provides power and network access for IP streaming and camera control via web interface or Telnet. -
Page 4: Installation
Installation Guide for the ConferenceSHOT ePTZ Auto-Framing Camera Installation This section covers: Selecting the location for the camera Verifying that the camera is ready to install Installing the mount Connection diagrams Mounting the camera And a required safety note here: Note PoE type networks connected to this equipment are for intra-building use only and should not be connected to lines that run outside of the building in which this product is located. -
Page 5: Pre-Installation Functional Check
Installation Guide for the ConferenceSHOT ePTZ Auto-Framing Camera Pre-Installation Functional Check If you're installing the camera where it's hard to reach, you may want to verify functionality before you install it. 1. Connect the camera in its minimum functional configuration. 2. -
Page 6: Status Light
Installation Guide for the ConferenceSHOT ePTZ Auto-Framing Camera Status Light The light in the camera's head indicates its current state. Purple – Initializing White – Active Red – Audio is muted Blinking red – Video is muted Yellow – Firmware update is in progress Blinking cyan –... -
Page 7: Next Steps
· Phone 800.572.2011 / +1.763.971.4400 · Fax +1.763.971.4464 · Email av.vaddio.support@legrand.com· Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. All patents are protected under existing designations.