Camera Setup - LEGRAND 430 521 Instruction Manual

_________________________________________________________________________________
4.5

Camera Setup

Sets the general functions of zoom camera module.
 Focus Mode
 Digital Zoom
 Image Flip
 Sharpness
[AUTO/MANUAL/SEMIAUTO]
Sets camera Focus mode.
 SEMIAUTO Mode
This mode automatically exchanges focus modes between Manual
Focus mode and Auto Focus mode by operation. Manual Focus mode
activates in preset operation and Auto Focus mode activates
during jog operation. With Manual mode at presets, Focus data
is memorized in each preset in advance and the camera calls
focus data in correspondence with presets as soon as camera
arrives at presets. It should shorten time to get
Focus mode automatically changes to Auto Focus mode when jog
operation starts.
[ON/OFF]
Sets the digital zoom functions to ON/OFF. If this is set to
OFF, the optical zoom function runs but the zoom function stops
at the end of optical zoom magnification.
[ON/OFF]
Sets System Image Flip Function to ON/OFF. When this function
is set to ON, flipped images always come out. When the camera
is installed as Desktop type, set to ON to get proper images.
[0~31]
Sets image sharpness to enhance pictures.
58
focuses.