Indoor Unit Installation - Hitachi RCI Service Manual

2 Unit installation
The suspension bracket can be hung in two positions:
Model
RPC-2.0FSN2E
RPC-(2.5/3.0)FSN2E
RPC-4.0FSN2E
RPC-(5.0/6.0)FSN2E
Select the suspension bracket system in line with installation requirements.
N O T E
Installation position (a) is recommended for a partially hidden installation.
Fit the suspension brackets on the sling bolts or the anchor bolts
and securing using the nuts and washers supplied.
Apply a thread-locking product to the bolts and nuts to prevent them
from loosening. Otherwise, abnormal noise may be caused by
mechanical vibrations and the indoor unit may become loose.

2.4.4 Indoor unit installation

C A U T I O N
To avoid damage to the resin side covers, remove them before lifting or moving the indoor unit.
Thread the nuts and fit the washers on all the bolts.
Fit the securing bolts onto the nut and washer of each bolt, starting on one side.
Check that the nuts and washers are correctly secured with the suspension bracket retainers and fit the brackets onto their
nuts and washers on the other side.
Bear in mind the position of the side for pipe connection before lifting the indoor unit.
39
SMGB0063 rev. 1 - 10/2010
A B
1094 920
1314 1140
1314 1140
1574 1400
C D
1010 150
1230 150
1230 110
1490 110
E F
220 255
220 255
280 235
280 235
2