Table of Contents
Advertisement
5 Control system
N O T E
•
The symbol "■" indicates the position of the DIP switches. The figures show the setting before transmission
or after selection.
•
If the "■" mark is not displayed, this indicates that the position of the pin is not affected.
The indoor unit PCB operates with four types of DIP switches, a slide switch and a rotary switch. The position is as follows:
LED1
LED3
LED4
168
SMGB0063 rev. 1 - 10/2010
LED indicator
This LED indicates the transmission status between the indoor unit and the
Red
remote control.
This LED indicates the transmission status between the indoor unit and the
Yellow
outdoor unit.
Green
PCB power supply
Hide quick links:
Advertisement
Table of Contents
