Removal Of The Inlet And Outlet Air Thermistors - Hitachi RCI Service Manual

10 Servicing

10.4.2 Removal of the inlet and outlet air thermistors

Inlet air thermistor
Nº
1 Tie
2 Cable clamp
3 Thermistor
N O T E
Disconnect and remove the thermistor.
The thermistor is located on the outlet side of the unit.
Nº
1 Location of the air inlet thermistor
N O T E
To disconnect and remove the appropriate thermistor,
previously see the chapter corresponding to the wiring
diagrams in this Manual.
Remove the screws securing the rear cover of the unit.
Disconnect and remove the thermistor.
297
SMGB0063 rev. 1 - 10/2010
Part
Part
10