10 Servicing
Remove the screws -A- securing the drain pan and remove it.
N O T E
When fitting, seal the drain hose gasket correctly.
10.5.6 Fan removal
Remove all screws -A- from the lower cover of the unit and separate
it.
Remove the electrical box cover
cover, see on page 303.
Disconnect the fan motor.
N O T E
To disconnect and remove the fan motor, previously see the
chapter corresponding to the wiring diagrams in this Manual.
Remove the drain pan
Removal of the drain
305.
Remove the wiring A- from the electrical box and release it from
the support -B-.
Remove the screws -C- on both sides of the fan.
C A U T I O N
•
Make sure the fan can be removed correctly, without the
risk of injuring anyone in the surrounding area.
•
The fan is heavy. Request the assistance of two operators
to hold the fan while it is being removed.
306
SMGB0063 rev. 1 - 10/2010
Removal of the electrical box
pan, see on page