Removal Of The Drain Mechanism - Hitachi RCI Service Manual

10 Servicing

10.4.5 Removal of the drain mechanism

Nº
1 Drain pump
N O T E
To disconnect and remove the drain mechanism, previously
see the chapter corresponding to the wiring diagrams in this
Manual.
Remove the drain pump support screws and remove it.
Nº
1 Bolts
2 Drain pump
3 Service cover
N O T E
Prior to installing the new pump:
1 Remove the electrical box from the unit to connect it to the
printed circuit board (PCB) in line with the instructions
given in chapter Removal of the electrical
295.
2 Seal the drain hose gaskets correctly.
300
SMGB0063 rev. 1 - 10/2010
Part
Part
box, see on page