Hitachi RCI Service Manual page 215

6 Optional functions
Part Optional function
Automatic timer off setting
F1
Main and secondary
F2
remote control setting
Automatic temperature
F3
setting release
Automatic release time
F4
Automatic cooling
F5
temperature release
Automatic heating
F6
temperature release
Prevention of operation
stoppage due to remote
F7
control operating error
Operation mode selection
F8
interlock
203
SMGB0063 rev. 1 - 10/2010
Indivi
dual Condition
Settings
settin setting
g
Function not
00
valid
01 1 h
02 2 h
X
03 3 h
04-24 (04-24) h
0A 0.5 h
0B 1.5 h
00 Master
X
01 Slave
00 Not available
X
01 Available
30 minutes
00
(factory setting)
01 15 minutes
X
02 60 minutes
03 90 minutes
19 19 °C
20 20 °C
21-24 (21-24) °C
25 °C (factory
X 25
setting)
26-28 (26-28) °C
29 29 °C
30 30 °C
19 19 °C
20 20 °C
21-24 (21-24) °C
25 °C (factory
X 25
setting)
26-28 (26-28) °C
29 29 °C
30 30 °C
X – –
00 Not available
X
Available
01
(factory setting)
Description
This function is used to switch off the timer
automatically when the unit has been
started by remote control.
This function is used when two remote
controls are installed in a system.
This function releases the fixed
temperature setting after a certain time to
limit unit operations and save energy.
This function is used to set the automatic
release time with the temperature setting
This function is used to set automatic
temperature release for the FAN/COOL/
DRY functions.
This function is used to set automatic
temperature release for the HEAT
function.
–
This function is used to prevent changes to
the operating mode.
6