Removal Of The Fan Parts - Hitachi RCI Service Manual

10 Servicing
Nº
1 Location of the thermistor
2 Location of the thermistor
N O T E
• Black connector: liquid thermistor.
• Yellow connector: gas thermistor.

10.4.4 Removal of the fan parts

Fan parts: fan motor, fan casing and duct.
Nº
1 Locks
2 Duct
3 Fixture supports
4 Fan motor
5 Fan casing
Remove the rear cover as indicated in chapter
and outlet air thermistors, see on page 297.
Remove the tape located in the centre of the casing.
Press the locks and remove half of the fan casing.
Remove the fixture support screws and carefully remove the motor together with the fans.
Loosen the screws securing the fans to the motor shaft.
N O T E
If the fan casing is to be fully removed, remove the screws securing the other half to the fan motor fixture.
299
SMGB0063 rev. 1 - 10/2010
Part
Part
Removal of the inlet
10