Removal Of The Fan Parts - Hitachi RCI-1.0FSR Service Manual

7 Servicing
RPI(L/H)-(0.4-6.0)FSRE - Ducted indoor unit

7.5.9 Removal of the fan parts


RPI-(1.5-2.0)FSRE
1 Remove the motor cover as explained in "7.5.4 Removal of the motor
2 Remove the casing screws (2 screws in the casing assy).
3 Press the locks and remove half of the fan casing.
4 Remove the motor support screws.
5 Loosen fixing screw for the fan runner with a hexagon wrench and remove the fan runner from the motor shaft.
6 Remove the runner from the casing.
7 Then remove the fan motor.
?
N O T E
If the fan casing is to be fully removed, remove the screws securing the other half to the fan motor fixture.
Casing screw
229 SMGB0137 rev.0 - 05/2021
Bottom side
Locks
RPI-(1.5-2.0)FSRE
cover".
Motor support screws
7