Operation; Welding Parameters - Soyer BMH-22i Operating Instructions Manual

3.3

Operation

• Connect stud welder to earth.
• Adjust stud welding gun as described in Appendix A, chapter 2.
• Connect stud welder to mains supply.
• Adjust parameters at stud welder according to welding studs to be used.
• For standard operation, insert welding studs into stud holder.
• Position stud welding gun on workpiece and press trigger switch.
For further instructions regarding connection and operation, please refer to the
operating instructions of your stud welder.
Before welding, carry out some test welds and check them to determine optimum
setting values.
Random samples have to be taken during production to ensure optimum welding
results.
3.4

Welding parameters

For welding parameters, please refer to the operating instructions of your stud welder.
Appendix A /12
Appendix A / Adjustment of short-cycle drawn arc stud welding guns