Operation Of The Ph-9 Srm; 12 +G; Safety Check - Soyer PH-9 SRM12 Operating Manual

Description of the PH-9 SRM
Technical data of the PH-9 SRM
Stud welding devices
Weight
Subject to technical changes

9.2 Operation of the PH-9 SRM

The integrated earth connection makes the operation and safety check different
to that of conventional welding guns.

9.2.1 Safety check

Danger from a faulty or manipulated gun
The welding gun has an integrated earth connection. A short-circuit may be
caused between the earth ring and stud chuck when the stud is reloaded
manually. The welding process may be started unintentionally if the trigger
buttons are faulty or bridged. This may cause burns.
•
Functional check The welding process is triggered by simultaneously
pressing all three trigger buttons (two-hand button a
on both sides and trigger button b). These buttons
must be checked for correct operation every time be-
fore starting operation:
With the welding device switched on press only the
trigger button (b) on the gun. The "Start" LED on the
device display must not light up.
38
12
+G stud welding gun
The gun is approved for operation on the following
Soyer stud welding devices:
•
•
•
Control cable adapter: F06770/FA
Earth cable adapter: F06771/FA
Gas adapter: F06772/FA
1.3 kg without cable
12
+G
WARNING WARNING
!
Do not operate the gun with faulty or bridged protection equipment.
Operating manual Soyer Bolzenschweißtechnik
12
+G stud welding gun
BMK-8i
BMK-12i
BMK-16i when using the adapter:
a
b