Special Function "Setting The Type Of Feeder And Its Functions" (Option) - Soyer BMH-22i Operating Instructions Manual

BMH-22i
• Follow the instructions on the display.
5.4.4

Special function "Setting the type of feeder and its functions" (option)

With automatic operation, this special function serves to adapt the control to the feeder (parameter 1-
4, only with BMK feeder). The type of feeder connected can be set by means of parameter 5.
To call this special function, please proceed as follows:
• Simultaneously press "arrow right" and "arrow left" keys and keep them pressed.
• Turn on/off switch to the "I" position to switch the stud welder on.
Display when setting feeder type "BMS"
Display when setting feeder type "BMK"
The parameters "Piston", "Ready", "Cont." and "BlAir" may be selected in 100 ms steps. The
parameters may be horizontally selected by using the function keys "arrow left" and "arrow right".
33