2.3
Safety instructions for the mode of operation
Hazards due to incorrect working method
Hazards f or operators and third parties can arise due to an incorrect working method.
•
•
•
•
•
•
•
Operating i n structions BMS-4 ACCU-DUO | Heinz Soyer Bolzenschweißtechnik
Ensure sufficient stability and a dry installation location for the device.
Make sure you do not knock over the device or pull it down from its position
with the gun cables.
Make sure, especially with mobile use, of your own good stability during
welding.
Do not hold the workpiece in your hands during welding. The workpiece must
be securely fixed during the welding process.
Never wrap the gun lines around parts of your body (e.g. arm) as electric
f ields can occur.
If the gun is not positioned properly or the gun settings are incorrect, a flash
can occur during welding. Do not look directly into the flash.
The gun carries out lif ting movements during the welding process. Do not
hold the gun tight in the area of moving parts.
13