Welding Operation; Carrying Out Welding - Soyer BMS-9 Operating Instructions Manual

12 Welding operation

In the following, it is described how weldings are carried out and how possible welding errors
can be avoided.

12.1 Carrying out welding

In the following, it is described how weldings are carried out with a stud welding gun.
Danger from incorrect operation
During stud welding, incorrect operation of the devices may cause many dangers.


Carrying out welding
Step 1:
Step 2:
Step 3:
Step 4:
Step: 5
Before using the stud welding device, see chapter "2. Important safety
instructions" on page 8.
If you have any problems understanding the operating instructions, contact
the manufacturer, Soyer.
Before welding, see chapter "2. Important safety instructions" on page
8.
Connect the gun to the stud welding device (see chapter "10.2
Connection of the stud welding device and the stud welding guns" on
page 36).
Check if a connection adapter may be required.
Insert the appropriate stud chuck and a welding stud (see chapter "7.
Description of the PS-9(K) stud welding guns" on page 23, chapter "8.
Description of the PS-1K stud welding gun" on page 27 and chapter "9.
Description of the stud chuck" on page 30).
Only use SOYER® welding studs.
Check the charging voltage and lift time/height of lift (see chapter "11.1
Adjusting the charging voltage and lift time on the stud welding device"
on page 39).
Ensure that the welding points on the stud and workpiece are
metallically bright.
Operating instructions Soyer Bolzenschweißtechnik 45