Special Function "Erasing The Working Storage; Special Function "Display Of Operating Counter; Special Function "Selection Of Language / Display Of Software Version Number - Soyer BMH-22i Operating Instructions Manual

After this, the stud welder can be restarted.
5.4.1

Special function "Erasing the working storage"

This special function serves as "RESET function" e.g. for eliminating troubles or starting the stud
welder the first time.
NOTE
The entire data of your working storage are erased when using this function. Your
personal settings such as welding parameters, language selection and other special
functions are reset to the basic setting.
To erase the working storage, please proceed as follows:
• Simultaneously press "arrow up", "arrow down", "arrow right" and "arrow left" keys and keep them
pressed.
• Turn on/off switch to the "I" position to switch the stud welder on.
• Follow the instructions on the display.
R
5.4.2

Special function "Display of operating counter"

• Simultaneously press "arrow up" and "arrow down" keys and keep them pressed.
• Turn on/off switch to the "I" position to switch the stud welder on.
• Follow the instructions on the display.
5.4.3

Special function "Selection of language / Display of software version number"

This special function serves to select different languages and to display the version number of the
software. The languages available are indicated on the display. For calling this function, please
proceed as follows:
• Simultaneously press "arrow up" and "arrow right" keys and keep them pressed.
• Turn on/off switch to the "I" position to switch the stud welder on and stop pressing the function keys.
32
BMH-22i