Operating Elements; Display Elements; Led Display - Soyer BMH-22i Operating Instructions Manual

5.1.1

Operating elements

• On/Off switch
Turn on/off switch to the "I" position to switch the stud welder on. The signal lamp shows that the stud
welder is operative.
Turn on/off switch to the "0"position to switch the stud welder off.
• Function keys for setting the welding parameters
R
6.1 Function key "arrow up"
6.2 Function key "arrow down"
• Function keys "arrow up/down"
Modification of selected parameters (flashing symbol in display)
• Function keys "arrow left/right"
Selection of parameters to be modified (shifting of the flashing symbol to the left or right).
5.1.2

Display elements

• LED displays
5.1
5.2
5.3
5.4
R

• LED display

5.1.3
The first line of the display shows the designation of the parameters to be set. The second line shows
the set value. When the parameter designation is flashing, you may change its value by using the
keyboard.
22
6.3
6.4
LED "Stud on Workpiece"
LED "Release"
LED "Gas Valve Open"
LED "Lift"
Function key "arrow left"
Function key "arrow right"
5.5 LED "Main Current"
5.6 LED "Final Contact"
5.7 LED (no function)
5.8 LED (no function)
BMH-22i