Symbols - Soyer BMH-22i Operating Instructions Manual

5.1.4

Symbols

Symbol Designation
Electrical energy
LED "Stud
on Workpiece"
LED "Release"
LED "Gas valve
open"
LED "Lift"
LED "Main current"
LED "Final contact"
LED "External"
Function key "Arrow
up"
Function key "Arrow
down"
Function key "Arrow
left"
Function key "Arrow
right"
Air function
"forward"
Air function
"backward"
Gas supply
Earth
Gun
24
Function
On/Off switch for turning the stud welder on and
off.
LED lights up when earth terminal of stud welder
is connected and stud touches the workpiece.
LED lights up when pressing release switch of
welding gun or welding head.
LED lights up with shielding gas valve being open.
LED lights up with lifting magnet of welding gun
being activated.
LED lights up when main current is supplied.
LED lights up after welding, with release switch
being pressed.
LED lights up when stud welder is operated by
remote control via the serial interface (RS232) (not
yet in use).
Upward alteration of the operation mode and the
parameters selected (represented blinking in the
display)
Downward alteration of the operation mode and
the parameters selected (represented blinking in
the display)
Selection of parameters to be changed
(relocation of blinking symbol to the left)
Selection of parameters to be changed
(relocation of blinking symbol to the right)
Air supply for stud welding gun/welding head with
automatic operation (optional equipment).
Air supply for stud welding gun/welding head with
automatic operation (optional equipment).
Gas supply for welding gun/welding head, coupler
socket KD - 1/4.
Marks earth cable connector to be connected with
earth cable.
Marks control and welding cable sockets to be
connected with welding gun.
BMH-22i