Technical Data - Soyer BMH-22i Operating Instructions Manual

3.5

Technical data

Designation
Welding process
Welding range
Material
Power source
Welding current
Welding time
Welding sequence
Standard gun
Power supply
E-continuous current
E-continuous power
E-maximum current
Open-circuit voltage
System of protection
Interfaces
(optional automatic set)
Compressed air supply
Shielding gas supply
Dimensions
Weight*
Colour
Subject to technical changes
*Slight deviations are possible depending on accessories.
WARNING
The "S" symbol is the symbol for welding current sources permitted for operation with
increased electrical danger. The "S" symbol on our stud welders refers exclusively to
the welding current circuit and not to the complete stud welder.
18
BMH-22i
Drawn arc stud welding (DS)
Electrode welding rectifier
SOYER threaded studs, DIN EN ISO 13918 from
M8 – M24 RD (MR) or Ø 8 – 22 mm
Steel, stainless steel and heat-resistant steel
Inverter technology
300 up to 2000 A (stud welding)
80 up to 300 A (electrode welding)
80 up to 200 A (TIG welding)
3 up to 1000 ms (only with operation mode "stud welding")
up to 50 studs/min. depending on the respective stud diameter
PH-5L stud welding gun
CEE 63 A (3P + protective earth conductor)
3 x 400 V 50/60 Hz +10% -15%
2 A / phase
1400 VA
180A / phase with 3 x 400 V (short-time operation)
85 V / DC (direct voltage)
IP21
Feeder interface: 15-pole socket (option)
CNC interface: 9-pole socket (option)
RS 232 interface: 9-pin plug (option)
max. 6 bar (compressed air only with optional automatic set)
max. 4 – 5 l/min.
560 x 420x 650 (w x h x d)
70 kg
RAL 5009 azure
BMH-22i