General - Soyer BMH-22i Operating Instructions Manual

1 General

This appendix describes the operation of the PH-2L, PH-4L and PH-5L stud welding
guns.
Some details of the illustrations shown in these operating instructions may be different
from your product depending on the gun type. This, however, does not have any
influence on the operation of the welding equipment.
Gun types, overview
Order No. Code designation
P02225
P02250
P02260
The stud welding guns were equipped with different welding cable connectors
depending on the welding range. Adapter cables (not included in delivery)
enable you to operate the stud welding guns with SOYER stud welders having
different welding cable connections.
Order list for adapter cables / connectors
Welding cable
connection to stud
welder
SK-25
e.g. BMK- 8,
BMK-10, BMK-12 W
SK-50/50
e.g. BMK-16i, LC, W
SK-95/120
e.g. BMH-22SV
Appendix A /2
Appendix A / Adjustment of short-cycle drawn arc stud welding guns
PH-2L
PH-4L
PH-5L
PH-2L
BK-50/70►SKM-25
Order no.: F03718/FA
No adapter required
BK-50/70►SK-95/120
Order no.: F04062/FA
Note
Control cable connector, 7-pin
Welding cable connector SK 50/70 mm²
Control cable connector, 7-pin
Welding cable connector SK 50/70 mm²
Control cable connector, 7-pin
Welding cable connector SK 95/120 mm²
PH-4L
BK-50/70►SKM-25
Order no.: F03718/FA
No adapter required
BK-50/70►SK-95/120
Order no.: F04062/FA
PH-5L
BK-95/120►SK-50/70
Order no.: F04061/FA
and
BK-50/70►SKM-25
Order no.: F03718/FA
BK-95/120►SK-50/70
Order no.: F04061/FA
No adapter required