Special Functions - Soyer BMH-22i Operating Instructions Manual

BMH-22i
Use the function key "arrow right" (4) to set the welding current.
• Use the function key "arrow up" or "arrow down" (1 or 2) to set the desired current intensity.
5.3.2.6 Operation mode "TIG WELDING"
In this operation mode the stud welder works as a TIG welding device.
Gas and welding current flow when pressing the key on the burner.
• Use the function key "arrow up" or "arrow down" (1 or 2) to set operation mode "TIG WELDING".
Use the function key "arrow right" (4) to set the welding current.
• Use the function key "arrow up" or "arrow down" (1 or 2) to set the desired current intensity.
5.4

Special functions

With the stud welder BMH-22i you can call additional special functions:

Start dealing with the special functions when you are familiar with the basic
functions of the stud welder.
The stud welder must be turned off when calling special functions. In order to call the respective
special function you have to press certain function key combinations and keep them pressed when
starting the stud welder. Turn off the stud welder by means of the on/off switch to terminate the special
functions.
31