Soyer BMH-22i Operating Instructions Manual page 4

Stud welder

Table of Contents

Congratulations on purchasing the BMH-22i SOYER stud welder.

You have made an excellent choice. Your BMH-22i SOYER stud welder was specially

developed for the high-speed fastening of SOYER welding studs in compliance with

DIN EN ISO 13 918 on metallic, weldable workpieces.

Our devices have been tested with regard to safety requirements and corres-

pond to the currently valid European and national guidelines. Proof of

conformity has been established and the manufacturer is in possession of the

corresponding documents.

SOYER

It is prohibited to transmit or reprint this document, as well as to utilize or disclose its

contents, unless this has been expressly granted.

particularly in the case of a patent grant or a GM registration.

We have verified that the contents of this pamphlet correspond to the hard- and

software described. Deviations, however, cannot be excluded so that we cannot

warrant for absolute compliance.

The illustrations contained in this instruction manual may vary in some details from

your product. This, however, has no influence on the handling of the machine.

The data in this documentation have been verified regularly and necessary corrections

will be incorporated in future impressions. Any suggestions for improvement will be

appreciated.

Date of issue:

Revision:

Printed in the Federal Republic of Germany

FOR YOUR SAFETY

Read all of these operating instructions prior to start-up. Please

follow all safety precautions as well as all chapters of these

operating instructions before starting to weld. Non-compliance

with the safety precautions can result in serious personal injuries

or death.

is a registered trade mark of Heinz Soyer Bolzenschweißtechnik GmbH.

January 02, 2006

Update Declaration of Conformity: 2021-02

BMH-22i

Table of Contents

Chapters

Table of Contents