Transport And Storage; Terms Of Warranty - Soyer BMH-22i Operating Instructions Manual

10

Transport and storage

The stud welder is robustly designed and has a two-piece metal housing with front and rear panel.
Owing to electronic components it should be ensured, however, that transport is free from vibrations.
The BMH-22i stud welder has two carrying handles on its top for easy transport and mobile use within
short distances.
CAUTION
The carrying handles are intended for transport by hand only. Never pull ropes
through these handles to lift the stud welder by means of a crane to the installation
site. The welding unit would become instable and might tilt from its original position. As
a result the handles could rip and the system would fall on the ground.
NOTE
Prevent unauthorized use of the stud welding system by children and unqualified
personnel.
After long system standstill, we recommend having the stud welding system checked
by SOYER

The housing of the BMH-22i stud welder corresponds to safety class IP 21. Please observe that this
system of protection is not suitable for being operated or transported in the rain.
11

Terms of warranty

We warrant for this equipment for a period of 12 months in the case of commercial, professional or
equivalent use. When repairs are necessary, we guarantee to undertake them in our factory in
Etterschlag. Parts subject to wear and tear are excluded.
Any claim to a warranty will be forfeited if damage is caused by improper operation, or if repairs or
interferences have been made by unauthorized personnel, or whenever accessories and spare parts
have been used which do not match our equipment.
We cannot guarantee the perfect function of the stud welder and the quality of welded joints if welding
studs acquired from another company are used.
52
®
customer servicemen prior to start-up.
BMH-22i