Positioning Motors - Planmeca Proline CC Technical Manual

Chapter H - PARTS REPLACEMENT & REPAIR
d)
e)
f)
2.5

Positioning motors

a)
b)
c)
d)
e)
Patient positioning mechanism motor
a)
b)
c)
Temple rest motor
a)
b)
c)
d)
e)
f)
H-4 Planmeca Proline CC panoramic x-ray
Remove the attaching screw of the cassette motors attaching shaft.
Remove the motor.
Remove the spring nipple and attaching axle with bearings.
Remove the cover of lower shelf.
Remove all the connectors.
Remove the handles.
Remove the attaching bolts of the positioning mechanism.
Remove the attaching mechanism.
Remove the panduit beside the patient positioning mechanism motor
Remove the patient positioning mechanism motor with rubber plate.
Remove the rubber plate and cogged wheel from the motor.
Remove all the panduits
Remove the PCB.
Unscrew the motor axle out of the nut.
Unscrew two screws from the plate
Remove the motor.
Remove the shaft.
Technical Manual