Other Panoramic Mode Adjustments - Planmeca Proline CC Technical Manual

Chapter E - DIMAX3 DIGITAL SYSTEM ADJUSTMENT
5

OTHER PANORAMIC MODE ADJUSTMENTS

E-38 Planmeca Proline CC panoramic x-ray
The following adjustments are performed according to the instructions given in chapter
"ADJUSTMENT & CALIBRATION" on page D-1.
PATIENT POSITIONING LIGHTS
•
Check the lights according to the instructions given in section "Checking the lights" on page
D-19. If necessary, adjust the positioning of the lights according to the instructions given in
section "Positioning light adjustment" on page D-20.
MECHANICAL ADJUSTMENT OR THE ROTATIONAL PART, refer to section "MECHANI-
•
CAL ADJUSTMENT OF THE ROTATIONAL PART" on page D-21.
TIME SETTING, refer to section "SETTING THE CLOCK" on page D-24.
•
EXPOSURE WARNING SIGNAL ADJUSTMENT, refer to section "EXPOSURE WARNING
•
SIGNAL ADJUSTMENT" on page D-25.
Technical Manual