Normal Mode Keyboard Functions; Normal User Functions; Special User Settings - Planmeca Proline CC Technical Manual

Chapter
B - KEYBOARD FUNCTIONS & MODES
2

NORMAL MODE KEYBOARD FUNCTIONS

2.1

Normal user functions

2.2

Special user settings

USER SETTING
TIME & DATE ADJUST-
MENT
AUTOMATIC RETURN
TEMPLE REST
MOTOR INACTIVA-
TION
AUTOMATIC TEMPLE
REST CLOSING INAC-
TIVATION
TEST MODE
WARNING SOUND
TONE ADJUSTMENT
PARAMETER HIS-
TORY DISPLAY
B-2 Planmeca Proline CC panoramic x-ray
The keyboard is always in the normal operating mode when the unit is turned on. Please refer to
the Planmeca Proline CC Panoramic X-ray User's manual for descriptions for the normal key-
board operation and instructions for normal everyday use of the unit.
Press the control (CTL) key to enter the special function mode. The CTL-key's indicator light
comes on. In the special function mode some of the keys have special functions, others do not
operate in this mode. When the CTL-key or a special function key is pressed, the indicator light
goes off and the keyboard is in the normal mode. In this section the special functions are
explained.
Table 1: Special user settings
CTL
CTL
hold for 3 seconds
CTL
hold for
4 seconds
AUTO
hold for
4 seconds
CTL
CTL
CTL
KEY SEQUENCE
kV
CTL
FOR DETAILS,
"SETTING
READY CLOCK" on page D-
PRET
24
"Automatic
on page B-3
"Temple rest motor
inactivation" on page
B-3
"Automatic
rest closing inactiva-
tion" on page B-3
"Test mode" on page
B-4
"EXPOSURE
READY
WARNING SIGNAL
PRET
ADJUSTMENT"
page D-25
"Parameter
READY
display" on page B-4
PRET
CTL
REFER TO
THE
return"
temple
on
history
Technical Manual