Moving The Carriage Manually - ABB FlexTrack IRT501 Series Product Manual

2.3.4 Moving the carriage manually

Release the brake
The carriage can be pushed manually to another position on the track.
It is recommended that the carriage is manually pushed along its complete stroke
after being installed and before running the track using the IRC5. This is to ensure
that there is no risk of collision other equipment in the vicinity of the track.
1
2
3
4
Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C
Action
Connect all cables to the controller as described
in Cables connections on page
Start up the controller as described in
on IRC5 controller on page 90
Press in the brake release button (A) shows in the
figure.
Push the carriage by hand to the desired location.
© Copyright 20042018 ABB. All rights reserved.
2 Installation and commissioning
2.3.4 Moving the carriage manually
Note/Illustration
88.
Connectors
on page.
xx1800001866
Release the brake
Continues on next page
53