Replace The Ball Bearing Blocks - ABB FlexTrack IRT501 Series Product Manual

4 Repair

4.3 Replace the ball bearing blocks

4.3 Replace the ball bearing blocks
Location
The figure below shows the location of the ball bearing blocks and other key parts:
xx1800002022
A
B
C
D
E
F
Required equipment
Equipment
Standard toolkit
Lubrication gun
Jack >2t
Use one of the recommended lubricants:
Equipment
Lubricant
Lubricant
Lubricant
Lint free cloth
Continues on next page
148
Ball bearing blocks
Carriage bracket
4 pcs hexagon head bolt M10x30 class 12.9 screws and 4x M10-16 narrow
contact-lock washers
Linear guideway
Mechanical stop (supports + rubber hard stop)
End cover
© Copyright 20042018 ABB. All rights reserved.
Note
The content is defined in
Note
CASTROL Longtime PD0
KLÜBER Microlube GB0
TOTAL Multis EP 0
Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C
Standard toolkit.