Decommissioning; Introduction - ABB FlexTrack IRT501 Series Product Manual

6 Decommissioning

6.1 Introduction

Introduction
This chapter contains information to consider when taking a product, robot or
controller, out of operation.
It details with how to handle potentially dangerous components and potentially
hazardous material.
General
All used grease/oils and dead batteries must be disposed of in accordance with
the current legislation of the country in which the robot and the control unit are
installed.
If the robot or the control unit is partially or completely disposed of, the various
parts must be grouped together according to their nature (that is, all iron together
and all plastic together), and disposed of accordingly. These parts must also be
disposed of in accordance with the current legislation of the country in which the
robot and control unit are installed.
Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C
© Copyright 20042018 ABB. All rights reserved.
6 Decommissioning
6.1 Introduction
179