Cables And Connectors - ABB FlexTrack IRT501 Series Product Manual

3 Maintenance

3.5.6 Cables and connectors

3.5.6 Cables and connectors
Inspection of electrical operations
Check the cabling
Check monthly:
If any cables ...
have been damaged trough wear or pinching
run against sharp edges
Check the connector
Check monthly:
Inspection of the cable chain
Once a month check that the cable track shows no trace of excessive wear due to
rub on a fixed part. If one element is damaged, it is possible to replace it without
removing the whole chain from the FlexTrack.
xx1800001990
138
WARNING
Turn off all electric power, hydraulic and pneumatic pressure supplies to the
robot and for the FlexTrack IRT 501-66/66R/90/90R.
• All the connectors on the controller, the SMB box and the motor are firmly
tighten, and that there's no damage to the cable outlet.
© Copyright 20042018 ABB. All rights reserved.
then ...
replace the cable
Replace the cable, remove the cause of the
wear, or route the cable in a different way.
Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C