Lubrication - ABB FlexTrack IRT501 Series Product Manual

2.9 Lubrication

Activating the automatic lubrication system
The automatic lubrication system needs to be activated before using the FlexTrack.
Once the system has been activated, it delivers the exact quantity of grease to
each port at required time interval, during one year.
Follow the instructions below to activate the cartridge:
1
2
Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C
Action
Introduce the battery and the cartridge LONGTIME
PD 0 in the port. The timer is activated once the
battery is inserted.
See Memolub manual on page 132
about MEMOLUB.
The grease is pushed in the piping by the pump;
a valve is sequencing the distribution to each port.
© Copyright 20042018 ABB. All rights reserved.
2 Installation and commissioning
Note/Illustration
for instructions
xx1800001961
xx1800001962
2.9 Lubrication
111