Replace The Racks - ABB FlexTrack IRT501 Series Product Manual

4.4 Replace the racks

Location
The figure below shows the location of the gear racks and pinion:
xx1800002028
A
B
Required equipment
Equipment
Standard toolkit
Rack clamps 3HAW107700357
Mounting rack 3HAWL000011
Loctite 243
Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C
Pinion
Rack
© Copyright 20042018 ABB. All rights reserved.
4.4 Replace the racks
Note
The content is defined in
page 120.
The rack clamps are part of the kit of tools
necessary to assemble the FlexTrack.
See Procedure of assembly on page
The mounting rack is part of the kit of tools
necessary to assemble the FlexTrack.
See Procedure of assembly on page
Apply Loctite 243 on the screws that hold the
racks.
Continues on next page
4 Repair
Standard toolkit on
64.
64.
151