Activities 100 Km Or One Week; Racks And Pinion - ABB FlexTrack IRT501 Series Product Manual

3 Maintenance

3.4.1 Racks and pinion

3.4 Activities 100 Km or one week

3.4.1 Racks and pinion
General
It is recommended to inspect and, if necessary, clean the racks and the pinion
every 100 km or every week. If the FlexTrack IRT 501-66/66R/90/90R is not equipped
with an automatic lubrication system, it is necessary to lubricate the racks and the
pinion manually every 100 km or every week.
Location
The figure below shows the location of the gear racks and pinion:
xx1800001972
A
B
Continues on next page
124
Pinion
Rack
© Copyright 20042018 ABB. All rights reserved.
Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C