Update Revolution Counters - ABB FlexTrack IRT501 Series Product Manual

5.3 Update revolution counters

Procedure
This procedure must be applied if revolution counter value is loss for the Track.
1
2
3
4
5
6
7
Product manual - FlexTrack IRT501-66/66R/90/90R
3HAW050008590-001 Revision: C
Action
Align the sharp edge of the moving part of the
calibration marker with the line of the fixed part
calibration marker.
Tap ABB on the top left of the FlexPendant.
Tap Calibration.
Select the desired mechanical unit.
Tap Update revolution counters.
Select the desired axis.
Tap Update.
© Copyright 20042018 ABB. All rights reserved.
5 Calibration
5.3 Update revolution counters
Note/Illustration
xx1800002078
177