Zone Division - ABB FlexTrack IRT501 Series Product Manual

2 Installation and commissioning

2.10 Zone Division

2.10 Zone Division
Description
The purpose of the zone division is to divide the track into zones. It consists of
switches that sense when the carriage comes into respective zones using moveable
cams. One set of switches is used for two zones, and two sets of switches for four
zones. If zone division is chosen the option EPS (Electronic Position Switches) is
not necessary, for more detailed information regarding EPS, see
specification - Controller IRC5 with FlexPendant
Position Switches
The wiring of the zone division is subject to the system layout. Hence, the design
of the circuit is left to the system integrator. Refer to the wiring diagram developed
by the system integrator for details on how the zone division sensors are used.
Continues on next page
112
(Document ID: 3HAC027709-001).
Product manual - FlexTrack IRT501-66/66R/90/90R
© Copyright 20042018 ABB. All rights reserved.
Product
and Application Manual Electronic
3HAW050008590-001 Revision: C