Jeti Tauro H3300LED Operator Manual
Perform Nozzle Check
Print the "NozzleCheckColors" built in patterns to confirm the nozzles functionality.
When Roll to Roll is mounted and Roll of paper is already in place see procedure:
How to Perform the
Nozzle Check Roll to Roll mode
Procedure 4-1: How to Perform the Nozzle Check manual mode
- Step 1: Select the JobList tab (outlined in
red
in Fig.4-17) in the GUI.
Fig.4-17: Job List Window
- Step 2: Select the Filter (outlined in white in Fig.4-17).
- Step 3: Activate "Show technical images" (outlined in
green
in Fig.4-17).
- Step 4: Select Job Name NozzleCheckColors (outlined in
blue
in Fig.4-17).
- Step 5: Apply the Filter (outlined in
yellow
in Fig. 4.17).
- Step 6: Select the layout In the Ready List (outlined in
cyan
in Fig. 4.17).
- Step 7: Add the selected layout to the queue (outlined in
magenta
in Fig. 4.17).
- Step 8: Open the queue pane outlined in
red
in Fig. 4.17) and start the queue. (outlined in
blue
in
Fig.4-18)
Fig.4-18: Queue Pane
Agfa Graphics
Revision 1.0
Chapter 4
33