Joblist Mode
In Joblist Environment mode, the operator can do everything regarding the jobs to be printed.
Job Environment
In the Job environment pane, the operator can perform the following tasks:
• Print layouts (see procedure Printing a job in Manual Mode or Printing a job in Continuous)
• Modify layout settings (see procedure Adjusting Parameters in the Queue During Printing)
• Activate the Asanti Layout Editor
• Check the status of print tasks
• Modify the print tasks settings
• Check the media settings (see procedure Checking the Settings of a Job in the GUI)
• Retrieve finished Jeti Tauro H3300 LED print jobs/layouts
• Re-print finished Jeti Tauro H3300 LED print jobs/layouts
• Manually remove Jeti Tauro H3300 LED print jobs/layouts
Job Environment Overview
Apart from the title, navigation top bar and the status bottom bar, which are common to all environ-
ments, the Job environment screen contains two main areas:
• The job list pane
• The lay out details pane
Agfa Graphics
(outlined in red in Fig.6-16)
(outlined in green in Fig.6-16)
Revision 1.0
Jeti Tauro H3300LED Operator Manual
Fig.6-16: Job Environment Window
Chapter 6
81