Pre-conditions
The Purge Colorbar(s) command is available only when the following conditions are met:
• Waste bottle is NOT full
• Shuttle is 'HOMED'
• Jeti Tauro H3300 LED system is initialized
• Ink Supply Systems are READY (filled)
Hardware monitor
The hardware status overview pane
Environment and various electronic devices:
Main GUI Window - System Configuration
This window provides the environment to access the operation of the printer
Click on each of the icons on the left side of the main window to access the operation of the different
machine systems
Environment to ConFig.the System
Click on the icon
can be accessed from this window
Operation mode.
Agfa Graphics
(see Fig.6-9)
outlined in green in Fig.6-6
Revision 1.0
Jeti Tauro H3300LED Operator Manual
shows physical conditions related to the Printer
Fig.6-9: Hardware Status Window - Component Settings Window
to access the environment to conFig.the system. The following
Chapter 6
77